Preparation:
Before applying our epoxy paint we recommend any existing paint should be completely removed if flaking or if well bonded abraded to create a texture. We advise the area be vacuumed before application to remove any dust or dirt. Preparing the floor mechanically is always advised (grinding) however if that is not possible please use our Etch and Clean.
Application:
We advise when applying this product the ambient temperature is at least 7°C.
1. Pour 100% of your part B tin fast cure primer in to part A
2. Mix resin components together with a drill and paddle for 1 minute
3. Pour content in to a paint scuttle
4. Immediately begin applying your primer with an epoxy roller frame and sleeve
5. Use a brush around the edges for a smooth finish (a second pair of hands comes in useful)
6. Leave the primer to cure (around 4 hours)
7. Repeat steps 1 - 5 for your coat 1; fast cure epoxy floor paint
8. Leave the fast cure floor paint to cure (around 4 hours)
9. Repeat steps 1-5 for your topcoat fast cure epoxy garage floor paint
10. Leave the fast cure floor paint to cure (further 4 hours)
11. Return garage to service within 24-36 hours.