Resincoat Epoxy Primer

Resincoat Epoxy Primer is a premium-quality epoxy primer designed to provide an effective base coat for a wide range of surfaces. The low viscosity, solvent-free formulation allows for excellent penetration and adhesion, ensuring a strong and durable bond with the substrate. This industrial twin pack primer is ideal for preparing surfaces prior to painting, as it helps to seal and protect the surface, while also providing a smooth and even base coat for the application of Resincoat Epoxy Floor Paints.

Using an epoxy primer prior to applying Resincoat Epoxy Floor Paints is essential for a number of reasons. Firstly, it helps to create a strong and durable bond between the paint and the substrate, ensuring that the paint adheres well and is less likely to peel or flake over time. This is particularly important in high-traffic areas or environments where the surface is subjected to regular wear and tear.

Secondly, an epoxy primer helps to prevent moisture from penetrating the surface, which can cause damage to the substrate and compromise the integrity of the paint. This is particularly important in environments where there is a risk of water damage, such as in garages or warehouses.

Thirdly, an epoxy primer provides a smooth and even base coat, which helps to improve the coverage and quality of the top coat. This ensures that the finished surface looks professional and uniform, while also providing a high level of protection against wear and tear.

Please see below for coverage rates. If you are coating a large area and would like expert advice please call our team who will be happy to assist you.

1kg: 5m²
2.5kg: 12.5m²
5kg: 25m²
10kg: 50m²

1 coat of primer is generally sufficient. 

Preparation:

Before application of this product it is critical the surface is prepared. Concrete should be free from dust and laitence through sanding or wire brushing. Blow holes and defective concrete should be made good using a Resincoat Repair Mortar. Ensure the concrete is thoroughly clean and any loose material of any kind should be removed with a vacuum.

Application:

We advise when applying this product the ambient temperature is at least 7°C. 

1. Pour 100% of your part B tin in to part A
2. Mix resin components together with a drill and paddle for 1 minute
3. Pour content in to a paint scuttle
4. Immediately begin applying the primer with an epoxy roller frame and sleeve
5. Use a brush around the edges for a smooth finish (a second pair of hands comes in useful)

Subsequent coats of primer or paint should be applied between 12-24 hours after the primer has cured and is touch dry.

PLEASE NOTE: The pot life of this product is 20 minutes. This means the product will start to chemically cure after this time. Ensure you remove the primer from the tin in this window. The primer will then be workable on your floor for 40 minutes.