It is important to thoroughly read these instructions & prepare your surface correctly before using our patio paint bundle.
Preparation
Prior to using the etch & clean we advise all customer to thoroughly sweep the patio to remove any dust or dirt. The surface must be washed and then allowed to fully dry before applications. If you have an existing coating we recommend this is fully removed, if that isn’t possible it must be abraded to create a key prior to using the etch & clean.
Application:
We recommend the weather be dry & warm whilst applying this product but not overly humid.
1. Ensure you have used Etch & Clean as per the instructions provided
2. Stir the paint thoroughly before use.
3. Decant into your paint scuttle and begin applying the paint using a brush or roller. Please note the paint should be applied thinly.
4. Once the first coat has been applied leave to dry. Your brush or roller can be cleaned in tepid water ready to be reused for subsequent coats.
5. Apply your second coat.
6. Leave to dry & apply a third coat if required.
Aftercare:
Allow 7 days before jet washing. Jet washing should be performed on a fan setting at roughly 30cm distance from surface or with a dedicated rotary patio cleaner. Do not use jet patterns or turbo type lances.