Resincoat Outdoor Patio Paint

Resincoat Outdoor Patio Paint has been specifically formulated for the DIY user, easy to use with great, long lasting results. The easy to use concrete flag paint is suitable for almost any outdoor patio area. The formula is a one-pack acrylic paint which means no hardener or activator is required. Once you are ready to paint, just open the tin and apply using a brush or roller. We currently offer 5 fantastic colour options which will rejuvenate any patio space. We currently offer samples for this product which you can view here.

​

*Please note there could be a colour variation between batches, please bare this in mind if you are placing another order.  Additionally colour may vary in different areas due to surrounding and light reflecting off the coating. If you have any questions regarding this please call our team on 0330 0570 695.

Preparation:

Important pre-requisites:

• Apply only in dry conditions - ideally the coating should avoid rainfall for 2 days where possible. 7 days should be allowed before jet washing.
  • Jet washing should be performed on a fan setting at roughly 30cm distance from surface or with a dedicated rotary patio cleaner. Do not use jet patterns or turbo type lances.
• 2 - 3 coats is recommended.
• Surface must be washed and then allowed to fully dry before application.
• Suitable etching formula should be used such as Resincoat Etch & Clean.
  
• Due to the amount of variation in patio substrates, we highly recommend applying to a small test area first to ensure a perfect bond and desired finish.

Application:

We recommend the weather be dry & warm whilst applying this product but not overly humid.

1. Ensure you have used Etch & Clean

2. Stir the paint thoroughly before use. 

3. Begin applying the paint using a brush or roller. Please note the paint should be applied thinly. 

4. Once the first coat has been applied leave to dry. Your brush or roller can be cleaned in tepid water ready to be reused for subsequent coats.

5. Apply your second coat.

6. Leave to dry & apply a third coat if required.