Ultrabind UV Resin Binder

The resin can be used for Resin Bound driveway projects and is easy to use and apply. It is compatible with almost any washed and dried aggregate blend to create a stunning driveway feature. Care must be taken to ensure the correct aggregate size is used. All our Resin products are proudly manufactured by Resincoat in the UK to the highest standard and are fully ISO 9001 compliant.

*Please note, the moisture content of the stone you use must be less that 0.5% anything above this may not be compatible with this product. 

• Huge range of decorative aggregates
• Fully permeable – no more puddles
• Quick & easy installation – cured within 6 – 12 hours
• Resistant to unwanted weeds, oil & petrol
• Very low maintenance – no loose stones
• Smooth attractive finish so easy to walk/ drive on

1 x Resin

1 x Activator

Each kit comes with the correct amount of resin pre weighed. The 1.6kg resin can be mixed with a drill and paddle whereas the 7kg size will require a professional forced action mixer.

The resin is available in 2 sizes; 1.6kg and 7kg see below for coverage rates:

* 1.6 kg resin – capable of encapsulating 25kg bagged aggregates which would cover 1.25m2 at 12mm thickness

* 7kg resin – capable of encapsulating 100kg bagged aggregates which would cover 5m2 at 12mm thickness

The application will depend on what size resin you purchase. For more information please call us on 0113 350 6366.

** Surface temperature must be greater than 7°C before laying this product.