Preparation-
Before applying this product we recommend you abrade the substrate and then completely remove any dust and dirt from your surface. You must also make sure you fill any cracks or holes.
Important Application Advice -
* This product must be applied on solid surfaces only
*Not for use on stained floors as these can bleed through
Application –
We advise when applying this product the ambient temperature is at least 7 degrees.
1. Stir the paint thoroughly before use
2. Apply your first coat with a brush or roller (start at the corner of your room and work backwards)
3. Leave to dry for 4 hours
4. Apply your second coat (two coats are recommended)
*Do not apply the product in damp, humid or extreme temperatures.
Once applied ensure the floor is not subject to any contamination as this could cause the coating to fail.