Preparation:
Before use of this product we advise the area should be fully cleaned to remove any dust or dirt. If possible vacuum the area to ensure there is no existing debris which could cause the formula to set unevenly. If the crack is large enough a wire brush should be used to clean out the crack.
Application:
1. Ensure your crack is free of any contaminations (dust & dirt)
2. Thoroughly mix parts A & B of your epoxy crack repair using a drill and paddle for a minimum of 90 seconds
3. Pour immediately on to your crack
4. Allow to fully cure
5. Clean all tools thoroughly after use
*Please note the pot life of this product is approximately 10 minutes.