Resincoat Asphalt Crack Repair
   

Resincoat Asphalt Crack Repair

Resincoat
ACR001
New
Resincoat Asphalt Crack Repair is an ultra-strong, pourable epoxy resin liquid is the ideal solution to penetrate... read more for commercial quote
Colour : Jet Black
Size : 1Kg
Hurry! only 49311 items left in stock.
£26.39

£21.99 ex VAT.

VAT included
Quantity

Add to Wishlist

Resincoat Asphalt Crack Repair is the ideal solution to filling holes in damaged tarmacs, asphalts and bitumen surfaces. The product will set stronger than concrete and fill cracks up to 2cm deep. For larger holes please view our Heavy-Duty Asphalt Repair Mortar. This product has good slip-resistant properties making it usable for roads and areas which are subject to traffic from heavy vehicles. The product is most suitable as a pourable application, curing to extremely high strengths.

Coverage Rates:

Maximum 6m @ 12mm x 12mm (1 Kg)

Application Guide:

Preparation:

Before use of this product we recommend the area should be vacuumed to remove any loose material or existing debris which could cause the epoxy formula to set unevenly. If the crack is large enough a wire brush should be used to clean out the crack.

 

Application:

1. Thoroughly mix parts A & B of your asphalt crack repair using a drill and paddle for a minimum of 90 seconds

2. Pour the formula in to the crack distributing it evenly as you go until the crack is filled

3. Once filled allow 12 - 24 hours for the epoxy to fully cure

Please note the formula is also suitable for use with a pressure injection though this may differ on a case by case basis. Should you require further information please call our technical team on 0113 827 2387.

 

Please note: The pot life of this product is 20 minutes. 

 

Pot life = Time to harden in pot following addition of hardener.

: ACR001
: 49311 Items
Hurry! only 49311 items left in stock.
New

Data sheet

Appearance
Low viscocity two part high strength epoxy resin, solvent free
Composition
Black / tarmac-like
Substrates
Very heavy duty
Product Components
Asphalt, macadam, tarmac and other blacktop surfaces
Typical Installations
pourable epoxy resin liquid designed to penetrate and seal fine asphalt cracks
Solvent Content
Solvent Free
Re-coat/Foot-traffic Time (at 20°C)
8-12 Hours
Car-traffic Time (at 20°C)
12-24 Hours
Pot Life
The Pot Life Of This Product Is 20 Minutes
Application Tools
This Product Can Be Poured, Or Applied With Pressure Injection

Specific References

UPC
500009905592
EAN13
5056489415458

Use collapsible tabs for more detailed information that will help customers make a purchasing decision.

Ex: Shipping and return policies, size guides, and other common questions.

  • Paste the label on a flat surface on the package
  • Make sure that both 1D and 2D barcodes are clearly visible
  • Ensure that the label is smooth and isn’t creased or wrinkled
  • Check for any tears, dents, holes or scratches
  • Pack your product tightly, with the right size packaging
  • Ensure both barcodes are on a flat surface of the package

You might also like