Resincoat Garden Shed Paint

*Please note colour may vary in different areas due to surrounding and light reflecting off the coating. If you have any questions regarding this please call our team on 0330 0570 695.

Coverage rates are approximate & depend upon the substrate.

5Kg - covers up to 55 - 60m²

On wooden surfaces 1 coat should be sufficient. If strong colour change is required 2 coats may be necessary. We always advise 2 coats on cement posts & gravel boards.

Preparation:

Before applying our coating ensure your surface is dry, clean and free from any dust and debris. If it has been previously coated, loose, flaking paint should be stripped back to bare wood. Test a small area first for colour and adhesion.

Application:

Brush/Roller:
1. Stir the product thoroughly, before and during use.

2. Brush or roller the product evenly along the grain of the wood.

3. Resincoat shed paint should be touch dry within 4 hours. Once coat 1 has been applied, leave to dry for 4-6 hours & repeat for coat 2 if required.

Spray Gun:
1. Stir the product thoroughly, before pouring contents into your chosen spray gun. The formula should be diluted down with up to 10% water. Refer to the sprayer user guide for full instructions before every use.

2. Cover any nearby surfaces in case of overspray. Any overspray should be cleaned up immediately (whilst still wet) with water and household detergent.

3. Resincoat shed paint should be touch dry within 4 hours. Once coat 1 has been applied, leave to dry for 4-6 hours & repeat for coat 2 if required.

Please note: When working with Resincoat Garden Shed Paint, it is possible for you to wash your tools, brushes and rollers with warm, soapy water once you have completed your project.

*Important: Cement posts & gravel boards will always need 2 coats.

USEFUL INFORMATION

• Do not apply the product in damp, humid or extreme temperatures.
• The paint comes in a larger tin to allow adequate room for mixing.